Öhlins Road & Track Coilovers – BMW M2 G87 / M3 G80 / M4 G82 RWD

Öhlins Road & Track Coilovers – BMW M2 G87 / M3 G80 / M4 G82 RWD

Part Number: BMS MW00S1 | Fitment: BMW M2 G87, M3 G80 & M4 G82 (RWD)

Over 40 years of motorsport engineering distilled into a street-ready coilover kit. The Öhlins Road & Track series delivers a genuine racing experience without sacrificing daily drivability — thanks to Öhlins' proprietary Dual Flow Valve (DFV) technology. Features temperature-compensated damping for consistent performance in all conditions. Öhlins has extensively tested these springs across all conditions — on public roads and on track — and recommends using the included spring rates. Corrosion-tested to ISO 9227 and backed by a 2-year worldwide limited warranty.

⚠️ Note: For vehicles equipped OE with EDC (Electronic Damper Control), an Öhlins cancellation kit is also required (sold separately). See cancellation kit table below.

Vehicle Fitment

Technical Specifications

Cancellation Kit (if required)

For vehicles equipped OE with EDC (Electronic Damper Control), an Öhlins cancellation kit must also be used. Ordered separately.

General Features

• DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
• Temperature-compensated damping for consistent performance in all conditions
• Individual ride height adjustment via threaded lower flange (spring seat position maintained)
• Spring preload adjustment with included C-spanner
• Rebuildable construction for long-term serviceability
• Corrosion salt spray tested to ISO 9227
• 2-year worldwide limited warranty
• Front & rear springs included

Front Features

• McPherson strut design
• Single bleed adjuster
• Spring preload adjuster
• Height adjustable — approx. 20mm lower than standard
• Coil springs included
• Use with original top mounts
• Optional: straight springs from 48000-XX series can be used with spring seat 25618-35 (wheel spacers required)

Rear Features

• Conventional shock absorber design
• Single bleed adjuster
• Separate spring preload adjuster
• Coil springs included
• Use with original top mounts

Kit Contents

• Complete coilover kit including springs and all mounting hardware
• C-spanner for spring preload adjustment
• Owner's manual and mounting instructions
• Öhlins sticker set

What is DFV (Dual Flow Valve)?

DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.

Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control. Traction is always maintained at its optimum level.

Öhlins also incorporates a unique needle bleed valve that expands with temperature, compensating for changes in fluid viscosity as the damper heats up. The result: consistent damping performance lap after lap, regardless of operating temperature.

Why Öhlins Road & Track?

• ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
• ✅ Proprietary DFV technology delivers genuine race-car response with OEM-level daily comfort
• ✅ Rebuildable and fully serviceable for long-term ownership and track use
• ✅ Precision ride height adjustment via threaded lower flange — spring geometry is never compromised
• ✅ ISO 9227 corrosion-tested and backed by a 2-year worldwide limited warranty