Injector Dynamics XDS Injectors – 34mm, 14mm Top, 8-Cyl Set | McLaren MP4-12C, 570S, 600LT, 650S, P1

Injector Dynamics XDS Injectors – 34mm, 14mm Top, 8-Cyl Set | McLaren MP4-12C, 570S, 600LT, 650S, P1

Application: McLaren MP4-12C, 570S, 600LT, 650S, 675LT, P1
Part Type: Fuel injector set (8)
Part Numbers: 1050.34.14.14.8, 1300.34.14.14.8, 1750.34.14.14.8, 2600.34.14.14.8

This listing covers the Injector Dynamics XDS injector set in the 34mm body, 14mm top configuration, supplied as a set of eight. It suits the McLaren MP4-12C, 570S, 600LT, 650S, 675LT and P1.

Choose your flow rate from the Injector Size option: ID1050X, ID1300X, ID1750X or ID2600-XDS. Every size uses the same 34mm / 14mm top configuration, so you can match the injector to your power target and fuel without changing fitment.

Key Features

• Corrosion-resistant internals, compatible with all known fuels including E85
• High impedance design – no resistor box required
• USCAR electrical connector
• Replaceable inlet filter extends service life
• Flow-matched set of eight

Available Sizes

• ID1050X / ID1050-XDS (1050cc) – 1050.34.14.14.8 – nominal flow 1065cc/min @ 3.0 bar (43.5 psi) on gasoline at 52°C
• ID1300X / ID1300-XDS (1300cc) – 1300.34.14.14.8
• ID1750X / ID1750-XDS (1750cc) – 1750.34.14.14.8
• ID2600-XDS (2600cc) – 2600.34.14.14.8

What's Included

• 8 x Injector Dynamics XDS fuel injectors, 34mm body, 14mm top, in your chosen size

Important Notes

• An ECU tune is required. Your tuner will need the injector data for your chosen size.
• All Injector Dynamics injectors are high impedance. If your car uses low-impedance injectors with a resistor box, the resistor box must be bypassed.
• McLaren 720S and Senna use the 16-injector set (part 1050.34.14.14.16 etc.), not this set. See the Injector Dynamics XDS McLaren 720S / Senna set.

Vehicle Fitment

• McLaren MP4-12C
• McLaren 570S
• McLaren 600LT
• McLaren 650S
• McLaren 675LT
• McLaren P1

Not sure which set suits your car? Email sales@coore.com.au and our team will confirm fitment.