More info
Öhlins Road & Track Coilovers – Porsche 911 997 GT3 / GT3 RS / GT2 / GT2 RS
Part Number: POZ MN04S1 | Fitment: Porsche 911 GT3, GT3 RS, GT3 RS 4.0, GT2, GT2 RS (997)
Over 40 years of motorsport engineering distilled into a street-ready coilover kit. The Öhlins Road & Track series delivers a genuine racing experience without sacrificing daily drivability — thanks to Öhlins' proprietary Dual Flow Valve (DFV) technology. Featuring a McPherson front strut and conventional rear shock with dustcovers, springs included, and a recommended drop of approximately 20mm. Corrosion-tested to ISO 9227 and backed by a 2-year limited warranty.
Vehicle Fitment
| Porsche 911 GT3 | 997 |
| Porsche 911 GT3 RS | 997 |
| Porsche 911 GT3 RS 4.0 | 997 |
| Porsche 911 GT2 | 997 |
| Porsche 911 GT2 RS | 997 |
Technical Specifications
| Part Number | POZ MN04S1 |
| Technology | DFV — Dual Flow Valve |
| Front Damper Type | McPherson strut |
| Rear Damper Type | Conventional shock absorber |
| Damping Adjustment | Single bleed adjuster (front & rear) |
| Front Spring Rate | 90 N/mm — included |
| Rear Spring Rate | 140 N/mm — included |
| Lowering Range | Approx. 20mm below standard (front & rear) |
| Dustcovers | Included (front & rear) |
| Top Mounts | Use with original top mounts (front & rear) |
| Springs Included | Yes — front & rear springs included |
| Rebuildable | Yes |
| Corrosion Testing | ISO 9227 salt spray tested |
| Warranty | 2-year limited warranty |
Included Springs
| Position | Spring Rate |
|---|---|
| Front | 90 N/mm |
| Rear | 140 N/mm |
General Features
- DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
- Individual height adjustment — approx. 20mm below standard
- Single bleed adjuster — compression and rebound
- Rebuildable for custom tuning
- Corrosion salt spray tested (ISO 9227)
- 2-year limited warranty
- Front & rear springs included
Front Features
- McPherson strut
- Single bleed adjuster
- Spring preload adjuster
- Height adjustable — approx. 20mm lower than standard
- Coil springs included (90 N/mm)
- Dustcovers included
- Use with original top mounts
Rear Features
- Conventional shock absorber
- Single bleed adjuster
- Spring preload adjuster
- Height adjustable — approx. 20mm lower than standard
- Coil springs included (140 N/mm)
- Dustcovers included
- Use with original top mounts
Kit Contents
- Complete coilover kit including springs and all mounting parts
- C-spanner for spring preload adjustment
- Owner's manual and mounting instructions
- Öhlins sticker set
What is DFV (Dual Flow Valve)?
DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.
Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control. Traction is always maintained at its optimum level.
Why Öhlins Road & Track?
- ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
- ✅ DFV technology — genuine race-car response with OEM-level daily comfort
- ✅ Covers GT3, GT3 RS, GT3 RS 4.0, GT2 & GT2 RS — one kit for the full 997 GT range
- ✅ Dustcovers included front & rear — long-term protection for track and road use
- ✅ Rebuildable, ISO 9227 corrosion-tested, 2-year limited warranty
