Radium Dual Catch Can Kit, CCV, Nissan R35 GT-R, Fluid Lock

Radium Dual Catch Can Kit, CCV, Nissan R35 GT-R, Fluid Lock

Application: Nissan R35 GT-R
Part Type: Dual CCV catch can kit, Fluid Lock
Part Number: 20-0555-FL

The Radium Engineering Dual CCV Catch Can Kit for the R35 GT-R places a catch can inline between each crankcase vent port and its matching turbo inlet, keeping factory function intact. The kit mounts at the front of the engine and interfaces with the breather lines running from each cylinder head to the turbo intake piping – one can per head.

At low loads these vents see near-atmospheric pressure, but at high load (WOT) crankcase flow is high and can deposit oil and sludge in the intake piping and intercooler, reducing intercooler efficiency and performance. The cans separate oil and water condensation from the crankcase gases before they reach the intake, and Radium's patented Fluid Lock design prevents the reservoir from overfilling and pouring collected fluid back into the intake if servicing is overlooked.

Key Features

• Direct Fitment: No drilling required
• 10AN ORB Ports: Large inlet and outlet ports
• 4AN ORB Drain Port: For an optional petcock drain
• Two-Step Baffling: Two-step oil separation
• O-Ring Sealed Dipstick: Check the level without removing the can
• Fluid Lock: Radium's patented system stops the reservoir overfilling into the intake

What's Included

• Anodised oil catch can(s) with integrated condenser and dipstick(s)
• Anodised aluminium R35 GT-R specific mounting brackets
• Anodised aluminium AN adapter fittings and hose ends
• Stainless steel mounting hardware
• Radium Engineering PCV hose
• Two catch cans (one per cylinder head breather)

Optional Parts

• Radium Catch Can Kit, PCV, Nissan R35 GT-R, Fluid Lock (20-0565-FL) – PCV-side catch can – recommended together with this kit
• Radium Triple Catch Can Kit, Nissan R35 GT-R, Fluid Lock (20-0566-FL) – triple kit combining 20-0555-FL and 20-0565-FL

Important Notes

• This kit does NOT address blow-by from the PCV valve side of the crankcase – Radium recommends using it with the 20-0565-FL PCV kit
• Check the level with the integrated dipstick from 3-4 weeks of driving and empty as needed by unscrewing the lower reservoir (or fit a petcock drain kit where space allows)
• Installation instructions are available in the Instructions tab

Vehicle Fitment

• Nissan R35 GT-R

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.