Porsche GT3
Öhlins Advanced Trackday kit features the famous TTX (Twin-Tube) technology. In this particular version, its custom made for the Porsche GT3. The unique combination of a 46 mm, two way adjusted, through-rod and lightweight McPherson strut for the front and a 36 mm rear mounted TTX shock will completely transform your car. 

The TTX 46 and TTX 36 shock absorbers are developed from Öhlins participation in GT and Touring car racing. That gives Öhlins Advanced Trackday kit a massive advantage. We are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of Safety, Comfort and Performance. With Öhlins TTX Technology the products deliver in all these areas.  

On the race track, you will cut seconds off your lap time compared to a standard setup. You are also just a few clicks away from a comfortable setting when driving to and from the race track, or work. With the 2-way adjustable TTX 46 and TTX 36 shock absorbers, you have the possibility to fine tune the cars handling to each race track. Just don't forget to keep your notebook close and write up your different adjustments you have made to save time and improve your track day skills even further. 

Öhlins professional test drivers have tested all settings to find the optimum performance so you can focus on the driving.

GENERAL FEATURES

• TTX-technology
• 2-way fully independent rebound- and compression adjustment
• Aluminum high strength & light-weight products
• Rebuildable
• 2 year limited warranty
• Height adjustable
• 20 mm lower than standard
• Springs ordered separately 

FRONT FEATURES

• Aluminum high strength, light-weight compact design McPherson strut
• Spring preload adjuster
• Coil springs (Springs ordered separately)
• Use with original top mounts
• Upgradeable to 3-, 4 & 5-way adjustable including blow-off valve

REAR FEATURES

• Aluminum high strength, light-weight compact design shock absorber
• Upgradeable to 3- or 4-way adjustable
• Spring preload adjuster
• Coil springs (Springs ordered separately)
• Use with original top mounts

KIT PART NO

• 35020-13 Cancellation kit PASM

SPRING RECOMMENDATION PART NO SPRING RATE

991 GT3

• Front main  48120-17 100 N/mm
• Front Helper Spring  05173-12
• Rear Main 48140-37 200 N/mm
• Rear Helper Spring 05173-12

991 GT3 RS

• Front Main 48120-21 120 N/mm
• Front Helper Spring 05173-12
• Rear Main 48140-37 200 N/mm
• Rear Helper Spring 05173-12

Suit:

POV MW00, Porsche 911 GT3 (992), year model 2021-.
This kit contains four shock absorbers and installation hardware, supplied from factory without springs.
05925-10, Lift adapter kit, for vehicles with OE lifting system.

Öhlins Product News PDF File
Mounting Instructions PDF File
Owners Manual PDF File